In 2004, the United States Food and Drug Administration (FDA) transferred regulation of many highly purified, “well-characterized†biopharmaceutical proteins from the Center for Biologics Evaluation and Research (CBER) to the Center for Drug Evaluation and Research (CDER), which until then had primarily regulated only synthetic, small-molecule drugs and chemical substances. The most novel/complex and the less-characterized biologics remained within CBER’s jurisdiction. This change complicated BPI’s mission somewhat. When the magazine was founded, we responded to questions from advertisers…
Analytical
Designing the Ideal Bioreactor with Single-Use Technology
Bioprocessing companies are hoping for a brighter future in biologics manufacturing that will include ever-higher titers of vaccines and therapeutic proteins grown in cell culture. It would also facilitate bioprocess operations without the recurring challenges that stem from process scale-up and human error. Moreover, that future would also comply with increasingly stringent regulatory and current good manufacturing practice (CGMP) requirements while providing better cost controls than we see today. How far away is this future? Perhaps not too…
Large-Scale, Insect-Cell–Based Vaccine Development
Vaccines are among biotechnological products characterized by continuous growth over the past decade. According to a 2011 report, the global vaccine market is expected to reach US$34 billion in sales by 2013 (1). Much development can be ascribed to vaccine treatments for cancer, autoimmune, and infectious diseases (which have risen significantly) as well as the growing worldwide population and emergence of new pandemics. Although to date the main health impact of vaccines is still in disease prevention, the…
Approaches to Debottlenecking and Process Optimization
Two major challenges associated with optimizing biomanufacturing operations remain unresolved. The first is variability: how to understand and improve manufacturing with significant variation in process times throughout all unit operations. The second is complexity: modern biomanufacturing facilities are complex and interconnected, with piping segments, transfer panels, and valve arrays, as well as water for injection (WFI) and other shared resource constraints. That complexity is becoming even greater with the need for process standardization and processing of higher (and…
Large-Scale, Single-Use Depth Filtration Systems
Clarifying cell culture broth is the first downstream unit operation in an elaborate sequence of steps required to purify a biological therapeutic. A combination of centrifugation, depth filtration, or tangential-flow filtration (TFF) is used for that operation. The availability of largescale, single-use, depth filtration technology in the recent years, however, has given process developers the capability to improve and simplify downstream processes. Clarification of Cell Culture Streams The main purpose of clarification is to efficiently separate…
Integrity Testing of Sterilizing-Grade Filters
Integrity testing of sterilizing-grade filters is necessary to reliably prevent damage to these sterile barriers from compromising the production of biopharmaceuticals. Documented integrity test results are essential to a manufacturing audit trail for releasing pharmaceutical products (1, 2). Accordingly, problems encountered during this testing can lead to considerable financial damages and substantial delays or even entirely prevent a production lot from being released to the market. Therefore, filter integrity testing is a critical step with high economic importance…
An Emerging Answer to the Downstream Bottleneck
Biotechnology companies have invested billions of US dollars in new manufacturing infrastructure, expanding the industry’s total mammalian cell culture production capacity from 670,000 L in 2002 to 2,550,000 L in 2010 (Figure 1) (1). This capacity expansion is estimated to have cost the industry about $20 billion (Figure 2) (1). Figure 1: Macroporous structure of Natrix chromatography media (see () Figure 1: () Figure 2: () That production capacity (and the investment it represents) is…
Retention of Highly Penetrative A. laidlawii Mycoplasma Cells
Mycoplasma are infamous for contaminating cell culture lines at rates as high as 80% (1,2,3,4,5). For biopharmaceutical processes, the inadvertent use of contaminated culture medium or medium components can lead to contamination of an aseptic process-validation media fill or cell culture medium for a bioreactor (6,7,8,9,10,11). Thoroughly testing medium components before use is generally impractical because of the large volume of material in use. Frequently, culture media cannot be autoclaved (because of the presence of heat-sensitive components or…
Scaling Up Stem Cells
Cell-based products are becoming increasingly important as potential biotherapies. Cell therapy is predicted to have a huge impact on the healthcare sector over the coming decades. Stem cells, in particular, are investigated as potential treatments for a diverse range of applications (such as heart disease and metabolic and inflammatory disorders) in which they might be used to restore lost biological functions. The cell therapy industry is starting to mature. Several emerging companies are now supporting late-stage clinical trials,…
Key Downstream Problems Decline While Industry Continues to Demand New Technologies
Downstream problems for biomanufacturers finally appear to be lessening. Over the past six years, demand for better purification has topped the list of biomanufacturing areas in need of improvement. This year, however, it appears that purification woes — though still a hot topic — are cooling off. After seven years of measuring the impact on capacity of specific biomanufacturing operations, preliminary data from BioPlan Associates’ ninth annual survey shows that activities associated with both optimizing internal downstream processes (DSPs) and…