When bioprocess liquids bearing suspended particles are filtered, retained particles can block and clog membrane filter pores. The pore size rating of a filter should be selected to retain objectionable particles by sieving, and the aptitude of its polymeric composition for adsorptive sequestration of those particulates also needs to be known. The quantity and nature of retained particles require accommodation if filtrative removal is to be considered successful. Too extensive a particle load will prematurely block a filter’s…
Author Archives: Theodore H. Meltzer
How Pore and Fibrous Interstice Structure Influence Filter Performance
A common objective in pharmaceutical processing is the removal of solids from fluid suspensions through filtration. The usual purpose is the removal of the solid particles to a specified extent, within a given time interval, at the largest possible throughput. Attainment of those goals is managed by proper selection of filtration conditions: principally an adequate effective filtration area (EFA) as defined by filter porosity and a proper rate of flow as regulated by applied differential pressure (ΔP) over…